INSTALL YOUR SIGN
A quick start guide to installing your custom made yacht signs.
There are TWO (2) METHODS to mount your signage: Method A) Adhesive mounting, OR Method B) Screw mounting.
Regardless of mounting method, when mounting an LED signage, at least one (1) hole must be drilled to insert LED wiring behind the signage. Each custom sign is supplied with a paper template that provides positioning for drilling holes.
Custom yacht Sign
LED controller & Wire bundle
Custom sign paper template
Studs & Nuts
TOOLS YOU'LL NEED
2. Nylon ties for wire management
3. Masking tape to attach paper template to yacht
4. Small sharpie for marking yacht sign position
5. Tape measure to ensure yacht sign is centered
6. Level to ensure yacht sign is level
7. Liquid electrical tape to seal wire connections
8. 1/4" & 1/2" protective wire wrap for wire management
Additional tools for Screw Mounting
Drill *With 7mm deep socket & 13/64" drive for studs, 5/16" drive for wiring
Important Safety Instructions
To avoid fire or shock hazard, only plug the boat sign LED controller into a matching
power supply. 12V DC LED controllers should only be connected to 12V DC power
supply. 24V DC LED controllers should only be connected to 24V DC power supply.
Measure, align & tape paper template onto boat wall.
Take your time to level and position the template. This step is the most important to achieve the ideal signage look on your boat.
MOUNT YOUR SIGN
Regardless of mounting method, when mounting an LED signage, at least 1 hole must be drilled to insert LED wiring behind the signage. Use the paper template to position drilling holes. For LED Signs with separate letters, each letter has an LED wire bundle and at least 1 hole should be drilled per letter to insert LED wiring.
Remove the paper template and mount signs using Method A OR Method B. If using Method B: Screw mounting, drill all the mounting holes according to hole positions within the paper template. Use studs & nuts provided to secure the signage from behind the boat wall.
Connect LED signage power supply (* does not apply to non- LED signage)
Each LED signage comes with a dedicated LED controller. The LED controller has electrical junctions for the LED wiring and power supply. To power and control your LED signage, connect V+ and V- junction to similar labeled wires on signage. Connect signage colored wires to R-, G-, B- and W- junctions